Using Fujifilm Prescale During The Manufacture and Test of Li-Ion Cells and Batteries

Sensor Products, Inc.

It is generally accepted that battery manufacturers reject over five percent of cells during manufacturing and testing. Two major causes of these rejects are cell leakage and failure of formation cycling and charge-retention tests. Leakage usually occurs when there are defects in the perimeter seals of cells or in fill tubes. Cycling and charge-retention problems are a result of defects in positive and negative electrodes. For economic reasons, all cell and battery manufacturers strive to eliminate these costly rejects.

 Click Here to Continue to the White Paper

Comments are closed.